Publicité
Les langues disponibles
Les langues disponibles
Power adapter
Water tank
Air outlet
Ceramic disc
OPERATION
The aroma diffuser is powered by connecting the supplied power adapter.
1. Place the aroma diffuser on a firm, flat surface, at least 10 cm away from walls or objects.
2. Remove the cover and water guard. Fill the tank with up to 160 ml bottled or tap water.
Do not exceed the maximum water level.
3. If desired, add 3-6 drops of the desired essential oil into the water.
INFORMATION ON THE USE OF ESSENTIAL OIL
Use 100% natural essential oil.
Use water soluble essential oil only.
Do not apply undiluted essential oils onto skin.
Do not ingest essential oils.
If you want to change the essential oil, turn off and disconnect the diffuser from the
power adapter. Remove the cover and water guard, and then empty the water tank.
Clean the inside of the water tank with a soft clean cloth or paper towel. Fill the
water tank with water again and add drops of a new essential oil into the glass tank.
Follow the instructions to operate the diffuser.
Line marking –
Maximum water level
Water spout
3
Publicité
