NuVinci Harmony Manuel D'utilisateur page 3

The Harmony Controllers
Harmony Advanced Controller
The Harmony Advanced Controller offers
both fully automatic and manual shifting
options. The rider switches between
"Automatic" and "Manual" modes by
pressing the "Mode" Button on the
Advanced Controller housing.
Automatic Shift Mode
Slower Pedal Cadence Setting
In Automatic Mode, Harmony automati-
cally adjusts ratio to maintain the rider's
preferred cadence. The rider can choose
their ideal cadence setting by rotating
the grip. The blue LED "RPM" display
indicates the cadence setting.
Mode Button
Faster
Pedal
Cadence
Setting
Manual Shift Mode
Faster Ratio for Speed
In Manual Mode, the rider is able to
shift on their own with "ride by wire"
technology. Like the cable-shift system,
the steeper the orange "hill" on the LED
display, the easier the ratio for climbing.
Note: The NuVinci Optimized
CVP cannot be shifted completely
through the ratio range when stationary.
The Harmony system will intelligently
wait for pedaling or wheel movement
if wide ratio changes are commanded
while stationary.
Harmony Base Controller
"Fast" Cadence Setting
"Medium" Cadence Setting
"Slow" Cadence Setting
The Harmony Base Controller makes
automatic shifting as simple as pressing
a button to choose your pedal cadence.
The cadence settings (typically slow,
medium or fast) are preset by the eBike
manufacturer according to the bike and
gearing specification.
Easier
Ratio for
Climbing
EN
3