Assembling - Philips HR2357 Guide D'utilisation

Assembling

• Make sure to tighten the front panel knobs during assembly.
• Make sure the appliance is not plugged in when assembling the appliance.
1
Push the mixing chamber into the appliance.
2
Point the mixing paddle to the hole in the main unit.
Insert the mixing paddle all the way into the main unit.
3
Attach the disc holder onto the appliance.
❶ Disc holder safety switch
❷ Disc holder safety switch lever
Note:
• Check that the safety switch ❶ and safety switch lever
❷ are set as shown in the illustration to the right.
10 ENGLISH
Follow below assembling steps to install the
pasta maker.
Important
1
2