Hitachi UG 50Y Instructions De Sécurité Et Mode D'emploi page 15

Telemetre laser
Masquer les pouces Voir aussi pour UG 50Y:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before measuring
After measuring
length
After measuring
width
Measuring volume (Fig. 12)
If you measure the length, width and height, the volume is automatically
calculated.
1 Select volume mode. (See "Selecting a measuring mode")
2 Measure the length.
Follow the instructions for measuring the length in area mode.
3 Measure the width.
Follow the instructions for measuring the width in area mode.
4 Measure the height.
○ Press the measure button and aim the laser at the target
height.
○ Press the measure button again to fi nish measuring. A beep
sounds and the height measurement and calculated volume
are indicated on the display.
Before measuring
After measuring
length
After measuring
width
After measuring
height
Display
Content
----- ft
2
----- ft
3.083 ft
→Length measurement
3.083 ft
→Length measurement
6.289 ft
→Area calculation result
2
2.040 ft
→Width measurement
Display
Content
----- ft
3
----- ft
3.083 ft
→Length measurement
3.083 ft
→Length measurement
6.289 ft
→Area calculation result
2
2.040 ft
→Width measurement
5.333 ft
→ Volume calculation
3
0.848 ft
result
→Height measurement
Measuring sides (Pythagorean theorem)
If you measure the two sides of a right triangle, the length of the third
side is calculated automatically.
Use this mode when you cannot measure the distance because there is
an obstacle or there is no elevated target surface.
To obtain side C (Fig. 13)
1 Select side mode. (See "Selecting a measuring mode")
2 Measure the length of side A.
Follow the instructions for measuring the length in area mode and
measure side A.
3 Measure side B.
○ Follow the instructions for measuring the length of side A and
measure the length of side B.
○ When you have fi nished measuring, a beep sounds and the
measured length of side B and calculated result of side C are
indicated on the display.
Before measuring
After measuring
side A
After measuring
side B
English
Display
Content
----- ft
----- ft
1.862 ft
→Side A measurement
1.862 ft
→Side A measurement
5.039 ft
→ Calculated result of
5.372 ft
side C
→Side B measurement
15

Publicité

Table des Matières
loading

Table des Matières