U.S.Robotics 7931 Guide D'installation page 6

Note: Your model number is 7931. It is important that you have your serial number
written down before you install the 24-Port 10/100/1000Mbps Switch. You can find your
serial number on the bottom label of the 24-Port 10/100/1000Mbps Switch and on the
side of the package. If you ever need to call our Technical Support department, you will need this
number to receive assistance.
Step 1. Connect the power supply
Step 2. Connect your 24-Port 10/100/1000Mbps Switch to your Ethernet-
ready device
Congratulations!
complete. As connections are established with the 24-Port 10/100/1000Mbps Switch, the
corresponding LED lights will turn on. Repeat this step as needed for up to twenty-three
additional devices.
2
1 3 5
U.S. Robotics
10/100/1000 Mbps LNK/ACT
FDX/HDX
24-Port Switch
LNK/ACT
FDX/HDX
Green = 1000M Orange = 10/100M
2 4 6
The installation of your U.S.Robotics 24-Port 10/100/1000Mbps Switch is
100-240VAC
7 9 11 13 15 17 19 21 23
8 10 12 14 16 18 20 22 24