Sony UY-S77 Mode D'emploi page 15

Loading an IX240 cartridge film into the carrier
Notes
• Before inserting the cartridge, make sure that the shading lid is closed.
• Be sure to use only processed cartridge film whose process indicator tab
is removed. If you insert a cartridge with its tab intact or not removed
completely, "Not a processed cartridge" appears on the screen. In this
case, make sure that the cartridge film is processed and remove the tab
completely. Then insert the cartridge film again.
• Do not touch the carrier or open the lid of the cartridge holder during
prescanning or scanning. This may cause improper scanning.
Parts identification of IX240 cartridge film
Shading lid
1
Press the cartridge eject lever and open the lid.
2
Insert the cartridge with the film status indicator end up.
3
Close the lid.
Film status indicators
1 Unexposed
2 Partially exposed
3 Exposed (unprocessed)
4 Processed
Process indicator tab
Cartridge eject lever
Make sure that the process
indicator tab is removed.
15
(EN)