About This Document; Target Groups Of The Operating Instructions; Associated Documents; Safety - Häfele FT 200 Instructions D'utilisation

1. About this document

These operating instructions are valid for the "FT 200 / FT 200 CAP" system.
They are part of the system and must be kept until the system is disposed of.

1.1 Target groups of the operating instructions

The target groups of the operating instructions are:
• Operator
• Installation personnel
• Start-up personnel
• Operating personnel

1.2 Associated documents

Document
Installation instructions for the individual system components
All product documentation is available from www.hafele.com.

2. Safety

2.1 Proper use

The "FT 200 / FT 200 CAP" system is an electromechanical closing device for furniture.
The following list outlines prerequisites for proper use:
• Indoor use
• Use in compliance with the technical data
• PS 4 power supply unit as the exclusive form of power supply
• Electrical connection to an earthed shockproof socket installed according to national
regulations. The connection data of the socket must match the connection data of the

product 3.2 Technical data.

2.2 Improper use

Any use that is not mentioned in chapter 2.1 Proper use is considered improper. The following
list outlines examples of improper use:
• Outdoor use
• Use in aggressive (containing salt or chlorine, for example) or damp environments
• Use in potentially explosive environments
• Use in the vicinity of electromagnetically sensitive devices
• Use in the vicinity of hot surfaces, heat sources, easily flammable materials or areas with
direct sunlight
• Omitting components during installation
• Changes to the installation order
• Use of defective or damaged components
• Use of non-original components
Contents
Mechanical installation

3.2 Technical data
23