Unold 87853 Notice D'utilisation page 21

Cleaning the shaving head:
5. Switch off the appliance.
6. Pull the attachment comb off of the appliance.
7. Use a Phillips head screwdriver to unscrew the screw on
the shaving head.
8. Remove the shaving head by carefully pushing it back
Clean the shaving head and the interior of the appliance
with a brush.
9. Do not knock on the shaving head, this can damage the
shaving head.
10. Now you can rinse out the shaving head under lukewarm
water. Then dry it with a soft, lint-free cloth.
11. To remove the last moisture residues, we also recommend
drying the shaving head with a hair dryer (moderate
temperature level).
12. The shaving head must be replaced on a regular basis,
depending on how often you use the appliance, at the
latest however after two years. Spare parts are available
from specialized shops or directly from our customer
service organization.
13. When the shaving head is completely dry again, fit the
shaving head onto the appliance and screw it firmly in
place.
14. Store the appliance in a dust-free location.
Copyright UNOLD AG | www.unold.de
21