Before Use / Charging; Operation With Attachment Comb - Unold 87853 Notice D'utilisation

BEFORE USE / CHARGING

1. Remove all packaging materials and transport safeguards.
Due to danger of suffocation, keep children away from
the packaging materials.
2. The appliance is not yet ready for use when it leaves the
factory; it must first be completely charged.
3. Connect the power cord to the charging station.
4. Plug the mains plug of the power cord into an electrical
outlet (220–240 V~, 50/60 Hz).
5. Ensure that the appliance is switched off.
6. Place the switched-off appliance in the charging station.
Ensure that the appliance is inserted correctly, otherwise
it cannot be correctly charged.
7. Ensure that the charging station is stable.
8. Connect the jack plug of the power cord to the socket of
the charging station.
9. The charging time is at least 16 hours (overcharging is
technically impossible).
10. Now the appliance is ready for operation.
Caution: You can also use a conventional type AA
battery (1.5 V) to operate the appliance. However,
only use such a battery if the appliance is completely
discharged, to prevent damage to the appliance.

OPERATION WITH ATTACHMENT COMB

1. Ensure that the appliance is charged.
2. If you want to use the attachment comb, fit it onto the
appliance. Hold the appliance firmly with one hand,
with your other hand fit the attachment comb onto the
appliance by inserting it onto the shaving head from
above. The comb must audibly click into place, only
thereafter is the comb properly seated on the appliance.
3. You can select from three cutting lengths (2, 4 and
6 mm). For selection, slide the attachment comb into the
desired position.
4. Switch on the appliance via the "ON/OFF" button.
Caution: The blades of the shaving head are sharp -
danger of injury!
Place the appliance with the attachment comb on the
skin, if possible always work counter to the direction of
hair growth.
18
Copyright UNOLD AG | www.unold.de