VOLTCRAFT BS-5 Notice D'emploi page 36

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Brightness level
Switching on the endoscope and basic functions
• Press the
• The camera image will appear on the monitor. Press the
button to rotate the image by 180º. Press this button again to
rotate the image by another 180º.
• The camera head features four built-in LEDs with six
brightness levels.
• Press the
press increases the brightness. The monitor will briefly display
the brightness level in the status bar.
• To turn the LED light off, press the button when the maximum
brightness level has been reached. Press the
again to switch the LED light back on.
Adjust the brightness so that the image displayed on
the monitor is not over- or underexposed.
• Press the
button again to zoom in further. The maximum zoom level is
4x, after which the image will revert to the normal size.
36
Memory full
button (11) to switch on the endoscope.
button when the camera is switched on. Each
button to enlarge the image. Press the
Memory status
Battery indicator
Zoom level (1–4x)
button

Publicité

Table des Matières
loading

Table des Matières