Inserting/Replacing The Batteries - VOLTCRAFT BS-5 Notice D'emploi

a) Inserting/replacing the batteries
• Use a Phillips screwdriver to open the battery compartment
(14) on the back of the endoscope, and then remove the
battery compartment cover.
• Insert four 1.5 V AAA batteries (not included) into the battery
compartment. Ensure that the batteries are inserted in the
correct polarity (+/-) as indicated in the battery compartment.
• Replace the battery compartment cover and tighten the screw.
Tighten the screw by hand to prevent over-tightening.
• Replace the batteries when the battery level indicator on the
monitor indicates a low battery level, or when the endoscope
switches off automatically.
• When the endoscope is powered by high-quality alkaline
batteries at room temperature, you should be able to use the
camera and monitor for approximately 150 minutes. When the
flashlight is switched on, the battery life is approximately 35
minutes.
• Remove the batteries when you do not plan to use the product
for an extended period.
34