Publicité
Les langues disponibles
Les langues disponibles
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
⁷⁄₁₆" Wrench
Parts Supplied:
Rigid casters (2)
Swivel casters (2)
Caster Use Requirements
Intended for use on Gladiator
only.
Maximum weight limit is 300 lbs (136 kg).
Unpack the Casters
1. Verify contents. See "Parts Supplied."
2. Dispose of/recycle all packaging materials.
Install the Casters
IMPORTANT: Install the casters to the cabinet bottom with the two
rigid casters at the front and the two swivel casters at the rear.
®
1. Empty the Gladiator
Steel Modular GearBox cabinet and lock
the cabinet door.
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install
cabinet or locker.
Failure to do so can result in back or other injury.
2. Lay the cabinet on its back on top of cardboard or other
protective material.
CASTER SAFETY
Your safety and the safety of others are very important.
DANGER
ASSEMBLY INSTRUCTIONS
¹⁄₄" – 20 Hex-head
bolts (16)
®
Steel Modular GearBox cabinets
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
3. Remove the leveling legs, if previously installed.
4. With the brake toward the inside of the cabinet, align the holes in
a rigid caster mounting plate with the holes in the bottom front of
the cabinet as shown.
NOTE: The holes in the caster mounting plates will align only
with the corresponding holes in the cabinet bottom.
5. Using four hex-head bolts, attach the caster to the cabinet.
6. Repeat Steps 4 and 5 for the remaining three casters making
sure to install the other rigid caster on the front and the swivel
casters on the rear.
A
B
A. Rigid casters
B. Swivel casters
7. Tighten all the hex-head bolts.
8. Lock the front casters, and stand the cabinet upright.
NOTE: Locking the casters will help keep the cabinet from
moving while it is being lifted.
9. Unlock the front casters and move cabinet to desired location.
NOTE: To keep the cabinet from rolling, lock the casters.
10. Unlock the door.
C
C. Caster mounting plate
Publicité
