Switching Heating Function On / Off - CHICAGO AJ55C-LED Manuel D'utilisation

dimmer 11 in the direction of rotation to reduce the brightness of
the flame simulator.

Switching heating function on / off

Note: The electric fireplace insert has 2 heating stages with different
heat intensities.
• Open the right hand cover 2 by opening it up towards the front.
• Set the switch for the first heating stage 8 to position I if you would
like a low supply of heat. Set the switches for the first 8 and se-
cond heating stages 7 to positions I and II if you would like a high
supply of heat.
Note: You can only put the second heating stage into operation if the
switch for the first heating stage 8 is set to position I.
ATTENTION! DANGER OF BURNING!
Please observe that the surfaces which
radiate heat can achieve temperatures
exceeding 50 °C. Make sure that the unit is switched
off and cooled off before you touch it.
ATTENTION! Please make sure that the unit
is not covered with towels, curtains or similar
objects.
Otherwise there is danger of overheating. Therefore,
always pay attention that the ventilation slots 1 are
kept clear.
• Flip the switches for the first heating stage 8 and the second hea-
ting stage 7 up in order to turn of the heating function.
13