Before Operation - CHICAGO AJ55C-LED Manuel D'utilisation

always pay attention that the ventilation slots 1
are kept clear.
• Do not operate the unit in rooms in which
dampness can develop or in which it can come in
contact with water.

Before operation

Note: Make sure that the dimensions of your fireplace correspond to
the assembly dimensions of the electric fireplace insert.
• Insert the electric fireplace insert into your existing fireplace. Pay
attention that you insert the electric fireplace insert into the existing
fireplace from the front.
ATTENTION! Do not place the unit directly beneath
a wall outlet. In the case of non-observance
danger of injury and / or damage to the unit can
result.
ATTENTION! Please pay attention that you do not
pinch the power line and protect it against sharp
edges. Damaged power lines increase the risk of an
electric shock.
Note: Make sure that the electric fireplace insert is correctly installed
in the existing fireplace.
Refer to the assembly instructions (see separate supplement) for your
existing fireplace and / or call on a professional.
• Insert the power plug 4 into an earthed outlet.
Note: Please observe that the power plug must still be able to be rea-
ched after installation of the electric fireplace insert.
Your electric fireplace insert is now ready for operation.
11