Digilan TV7230 Instructions D'installation page 53

Recall
Note: This request requires camera control access privilege
Method: GET
Syntax:
http://<servername>/cgi-bin/recall.cgi?
recall=<value>[&return=<return page>]
parameter value
recall Text string less than 30
characters
return <return page>
Application page CGI command
Note: This request requires administrator privilege.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/gen-eventd-conf.cgi?[ snapshot_enable=<value>]
[&weekday=<value>][&time_method=<value>][&begin_time=<value>]
[&end_time=<value>]
[&ss_prefix=<value>][&trigger_type=<value>]
[&md_prenum=<value>][&md_postnum=<value>][&md_delay=<value>]
[&sq_interval=<value>]
[&send_method=<value][&ftp_suffix=<value>]
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <length>\r\n
\r\n
<depends on method value>
If(method == get || method == set)
{
tue=<value>\r\n
wed=<value>\r\n
...
}
Else if(method == normal)
{
Application page contents
}
parameter Value
snapshot_enable 0
1
weekday 0,1,2,3,4,5,6
time_method always
interval
description
One of the present positions to recall.
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or
relative path according to the current path. If you omit this
parameter, it will redirect to an empty page.
description
Enable snapshot application
Disable snapshot application
The array indicate weekly schedule
24 hours full day
Select begin time and end time
53