Getting Started With Your Presidium Moissanite Tester (Pmt Ii) - Residium PMT II Mode D'emploi

1. GETTING STARTED with your Presidium
Moissanite Tester (PMT II)
Powering up your Presidium Moissanite Tester
This tester can be powered by either the use of an AC
adaptor (optional item sold separately) or through the use
of batteries. If AC adaptor is used, connect one end of
the AC adaptor to the tester (Fig 1.1) and the other end
directly into a suitable electrical outlet. Please ensure that
only the adaptor supplied by Presidium is used.
Fig. 1.1
If batteries are used (3 x AAA batteries), take note of the
positive (+) and negative (-) directions of batteries when
inserting the batteries into the tester (Fig. 1.2). The use
of alkaline batteries is preferred, as it should generally
give approximately two and a half hours of continuous
operation, while the use of ordinary batteries will give a
shorter working life.
Fig. 1.2
9