Velleman VDL215EQ Mode D'emploi page 3

9. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing and visible parts should not be deformed, modified or tampered with.
3. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
6. There are no user-serviceable parts, apart from the fuse.
10. Technical Specifications
Equalizer Bands 2 x 15, ISO Spacing, 25Hz to 16KHz
Equalizer Type Constant Q
Equalizer Travel 20mm (central indentation)
Equalizer Range +/-6dB or +/-12dB (selectable)
Inputs/Outputs RCA unbalanced
3-pin XLR actively balanced / unbalanced
6.3mm (1/4") TRS actively balanced / unbalanced
Input Impedance 20K Ohms Bal. ; 15K Ohms Unbal.
Maximum Input Level +22dBm (Level Control in central indentation)
Output Impedance Typ. < 150 Ohms
Maximum Output Level +22dBm (2K Ohms), +18dBm (600 Ohms)
PEAK LED Threshold 3dB (below clipping level)
Low-Cut Filter 30Hz, -6dB
Frequency Response 20Hz – 20KHz +/-1dB
THD + Noise <0.01% (20Hz – 20KHz +4dBm)
IM Distortion (SMPTE) <0.0005% (+4dBm)
Signal to Noise Ratio 110dB Below Max. Level (A-weighted)
Channel Separation 60dB (1KHz)
Line Voltage 200-240Vac, 50Hz/ 110Vac, 60Hz
Fuse 250Vac, 0.5A (order code FU0.5N)
Dimensions (WxHxD) 48.2x4.4x21cm = 19x1.75x8.2"
Weight 2.2kg = 4.8lbs
The information in this manual is subject to change without prior notice.
VDL215EQ 3 VELLEMAN