2.5.1 Service / Maintenance / Repair; Explanation Of The Pictograms On The Drill Stand - Baier BST 200 Traduction Du Mode D'emploi Original

2.5.1 Service / Maintenance / Repair

a) Maintain the unit with care in accordance
with the stipulations of the instruction
manual. Check whether moving unit parts
are in proper working order and do not jam,
whether parts are broken or damaged in
such a way that they impair the function of
the unit.
Many accidents are caused by poorly
maintained tools and accessories.
b) Repair and maintenance work may only be
carried out by an authorised service centre
of OTTO BAIER GmbH.
Otherwise, all liability and warranty claims
against OTTO BAIER GmbH expire.
c) Ensure that original BAIER spare parts and
original BAIER accessories only are used
when needed.
Original parts are available from authorised
dealers. Use of non original parts can cause
damage to the machine and an increased risk of
accidents.
2.5.2 Explanation of the pictograms
on the drill stand
The CE mark on a product means that the
product conforms with all the applicable
European regulations and has been
subjected to the prescribed conformity
assessment procedures.
Wear heating protection!
Do not dispose of tool in household
waste.
Waste equipment contains valuable
recyclable materials which should be
reused or recycled. Batteries, lubricants
and similar materials must not be allowed
to get into the environment.
Therefore, please dispose of waste
equipment through suitable collection
systems.
Read the instruction manual!
Before starting any work with or on the
equipment, this instruction manual, the
safety instructions and the warnings must
be read through carefully and observed.
| 21 |