yeedi 2 hybrid Manuel D'instructions page 12

2. Operating and
1
Remove Protection Strip and film
3
Docking Station Placement
6
Charge Robot
12
EN
Programming/2.2 Preparation
4
Install Side Brushes
Note:
automatically returns to the Docking Station to recharge itself. Robot can also be sent
back to the Docking Station at any time by using the yeedi App or by pressing the
AUTO Button on the robot for 3 seconds.
Empty remaining water from the Reservoir and remove the Cleaning Cloth Plate
before charging Robot.
When Robot completes the cleaning cycle or when the battery gets low, Robot
2
Assemble Docking Station
5
Power ON