Publicité
Les langues disponibles
Les langues disponibles
4. Place both devices not more than one meter away from
each other.
5. Press the button on the left ear cup until the LED
light alternately flashes blue and red. This indicates the
headphone has entered pairing mode.
6. As soon as the computer detects the new device you will
see "R2M Infinity". Select "R2M Infinity" to pair.
7. If your computer asks you to enter the PIN code, enter
„0000" (4 times zero). Once successfully paired, the
blue LED of the headphone will be always on.
Note: The headphone will turn off if not paired within 10
minutes.
Pairing the INFINITY with your phone
1. Make sure the headphone is switched off.
2. Place both devices not more than one meter away from
each other.
3. Press the
button on the left ear cup until the LED
alternately flashes blue and red. This indicates that the
headphone has entered pairing mode.
4. Activate Bluetooth on your phone and set it to „search
for new devices". Open the Bluetooth pairing menu.
5. Select the "R2M Infinity" to pair. Once successfully
paired, the headphones blue LED will be always on.
24
Connecting to paired devices
The INFINITY must have been previously paired with your
devices before you can connect.
When the INFINITY is turned on and not in pairing mode, it
will connect to the last paired device automatically in case
the device is switched on and Bluetooth is activated.
Note: on some computers you will need to manually
enable Bluetooth audio every time you connect.
call function
1. When there is an incoming call, the headphone will ring.
2. Single press the
button to answer an incoming call.
You may also press the answer button on your cellular
phone to receive the call in your headphone.
Music playback pauses temporarily.
3. To end a call, simply press the
Likewise, you may also end the call directly using your
cell phone.
4. As soon as you hang up, music playback resumes auto-
matically.
en
button once again.
25
Publicité
