Renkforce BT-RSD1802K Notice D'emploi page 68

Operation
• Station buttons 1-6 (15)
If you briefly push these buttons, you can select a station you have pre-set.
If you want to store a station you are listening to, simply push the desired button for more than 1 second.

Every one of the three FM ranges (F1-3) and the AM reception range (MW) has six station buttons.
Therefore you can assign 24 station buttons.
• DSP / TA button (2)
Keep this button pushed to switch the TA function on or off.
When you receive a traffic programme station, the display shows TP (traffic programme).
When you keep the TA button pushed, TA appears in the display as well.
If a different source is being played (e.g. SD playback), the programme is set to mute during the traffic announcement.
If you listen to a current radio programme at very low volume, volume will automatically turn up for the traffic report.
68

Operating Instructions
English