3M DMS 700 Série Guide De L'utilisateur page 20

Basic Operations
Action Description
Picture Picture modes are provided so the user can
Mode simply optimize the projector image set-up
to suit his/her program type:
1) TV
2) Business
3) Cinema
4) Sports
Brightness Adjusts the brightness of the image. The higher the setting, the brighter the image. The lower
the setting, the darker the image.
Contrast Adjusts the degree of difference between the dark and light in the image. The higher the value,
the greater the contrast.
Color Adjusts the intensity of the color in the image.
Tint Adjusts the balance of red-to-green necessary for realistic representation of video signals.
If input is NSTC then the Tint/Hue is Active
If input is Pal then the Tint/Hue is InActive
For all other component input, Tint/Hue is Active
Sharpness Adjusts the image to make it look sharper of softer. (At higher values, will switch to Detail
Enhancement).
Detail Brings out the detail of the image,
Enhance
Position Adjusts the vertical and horizontal position of the projected image.
Only VGA, DVI-D and DVI-A is Active.
20
Picture sub menu
The Color, adjustment values will change, but
the user will adjust the Color settings relative to
the Picture Modes.
Picture Modes Change
1) Color Temperature
2) Gamma Table
3) Brightness
4) Contrast
5) Noise Reduction
3M ™ Digital Media System 700 Series
© 3M 2007. All Rights Reserved.