Handicare VR2 Manuel D'utilisation page 29

motor
9002474 VR-2 90A Powermodule
1008388 VR-2 90A Powermodule twin actuators
Figure 9
9.2 Technical diagram battery charger
The controller's standard confi guration includes a '3-pin connection'. Ensure that the battery charger
is properly connected so that the 'negative pole' and the 'inhibit' are connected, enabling the system to
prevent the wheelchair from moving when the battery is being charged.
Figure 10
battery motor
mounting holes
seat RWD
seat FWD
9006377A
Technical diagrams | 29