MaxxHome 21216 Mode D'emploi page 16

Do not immerse the appliance, body, cord or plug in water or other liquid, to protect against
electrical shock and affecting the function.
Do not allow children to play with the socket and plug to avoid electric shock.
Do not place the appliance in the presence of explosive and /or flammable fumes.
Do not place the appliance on or near the flammable material, such as tablecloths, curtains
and others, to avoid fire hazard.
Be sure to use on a heat resistant and even surface, keep the appliance at least 30cm away
the wall, furniture or other flammables.
Do not use the appliance for other than intended use.
Physical or metal disability persons or those lack in knowledge of this item must be guided by
persons who have experience with this appliance and who will be responsible for their safety.
Keep the appliance away from children to avoid scalding, electric shock and/or other injuries.
close supervision is necessary when the appliance is used by or near children.
This appliances is intended for Household Use Only.
BEFORE THE FIRST USE
Remove all packaging material.
Remove an stickers or labels from the appliance.
Thoroughly clean the basket and the pan with hot water, some washing-up liquid and a
non-abrasive sponge.
Wipe the inside and outside of the appliance with a moist cloth.
Place the appliance on a stable, horizontal and level surface. Do not place the appliance on
non-heat-resistant surface. The appliance with good air circulation and away from hot surface,
and any combustible materials.
Place the basket in the pan properly, you hear the sound signal "tang". Slide the pan back to
the appliance.
This is an appliance that works on hot air. Don not fill the pan with oil or frying fat.
Do not put anything on top of the appliance. This disrupts the airflow and affects the hot air
frying result.
USE
1. Put the mains plug in an earthed wall socket.
2. Turn the Temperature Controller Knob to proper temperature.
3. Turn the Timer to 3 minutes for preheating. After this, the device is ready for use.
4. When the time to 0, carefully pull the fry pot out of the appliance, place the ingredients inside
the fry basket (Attention: do not exceed the maximum line); well connect the fry basket with fry
pot, slide the pan back to the appliance.
a) Never use the pan without the basket in it.
b) Do not touch the pan during and some time after use, as it gets very hot. Only hold the pan
by the handle.
5. Set the timer to the proper cooking time; then the appliance start to work
6. When you hear the timer bell, the set preparation time has elapsed. Pull the pot out of
appliance and place it on a heat-resistant surface.
7. Check if the ingredients are ready. If the ingredients are not ready yet, simply slide the pan
back into the appliance and set the timer to a few extra minutes.
8. If the ingredient ready, carefully pull out the pan, and press the basket release button and lift
the basket out of pan to remove the ingredients. Don not turn the basket upside down with the
pan still attached to it, as any excess oil that has collected on the bottom of the pan will leak
onto the ingredients.
9. Empty the basket into a bowl or onto a plate. When a batch of ingredients is ready, the
appliance is instantly ready for preparing another batch.
TIPS
Add some oil on the ingredients for a crispy result..
Shaking ingredients halfway during the preparation time optimize the end result and can help
prevent unevenly fried ingredients. To shake the ingredients, pull the pan out of the appliance
by the handle and shake it. Then slide the pan back into the appliance. Do not press the basket
release button during shaking.