Yamaha RY16-ML-SILK Mode D'emploi page 12

Crosstalk
@1 kHz Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
From/To To/From
CH N CH (N-1) or (N+1)
• Reference level is 23dBu.
• Crosstalk is measured with a 30dB/octave filter @ 22 kHz.
Sampling Frequency
Frequency Range
Temperature Range
Temperature Range
Analog Output Characteristics
Actual
Output
Source
Terminals
Impedance
CH 1 – 16 75 Ω
*1 0dBu is referenced to 0.775 Vrms.
*2 1=GND, 2=HOT, 3=COLD
*3 All DA converters are 24 bit linear, 128 times oversampling. (Fs=44.1 kHz, 48 kHz) / 64 times oversampling. (Fs=88.2 kHz, 96 kHz)
*4 +20dBu output level is also available by hardware modification. Please contact the Yamaha representative or authorized distributor
in your region.
Dimensions (W x H x D) and Net Weight:
Included Accessories:
Owner's Manual
RY16-AE
General Specifications
Sampling Frequency
Frequency Range
Temperature Range
Temperature Range
RL Conditions
600 Ω Adjacent outputs
Conditions
Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Conditions
Operating temperature range
Storage temperature range
Max. Output
For Use with
Level Select
Nominal
*4
SW
+24dBu (default)
600 Ω Lines +18dBu
+15dBu
405 mm x 42 mm x 258 mm, 1.5 kg
Conditions
Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Conditions
Operating temperature range
Storage temperature range
Min.
–
Min.
-1000
Min.
0
-20
Output Level
Nominal Max
(-20dBFS) (0dBFS)
+4dBu (1.23 V) +24dBu (12.3 V)
-2dBu (0.616 V) +18dBu (6.16 V)
-5dBu (0.436 V) +15dBu (4.36 V)
Min.
-1000
Min.
0
-20
Typ Max. Units
– -100 dB
Typ Max. Units
– +1000 ppm
Typ Max. Units
– 40 °C
– 60 °C
Balanced /
Connector
Unbalanced
XLR-3-32
Balanced
*2
type
Typ Max. Units
– +1000 ppm
Typ Max. Units
– 40 °C
– 60 °C