General Description - Bticino L4561N Instructions D'utilisation

1 INTRODUCTION
1.3

GENERAL DESCRIPTION

The Stereo Control is a device which allows the interfacing, insulation, level adaptation and control
via infrared signals between an external stereo source and the sound system BUS.
The item enables you to store and replicate INFRARED remote control codes with an operating
range
between 30 Khz and 80 Khz. Carefully check this feature and if necessary contact BTicino's technical
assistance to verify its compatibility.
8
7
6
SIGNAL BALANCE LED (3)
OFF
GREEN
(1)
GREEN
(2)
ORANGE
(1) ORANGE flashing on the peaks only
(2) Continuous ORANGE
5 4 3
No signal
Audio signal present
Best setting
Signal too high
LEGEND
1 Audio stereo input with double
RCA connector
2 Signal balance pushbuttons
3 Signal balance LED
4 Power supply LED
5 Infrared detector
1
6 USB Connector
7 3.5 mm connector for cable with
IR transmitter
8 8-pole connector for sound
2
system BUS
POWER SUPPLY LED (4)
GREEN
YELLOW
29
UK
Stand/By
On