Publicité
Les langues disponibles
Les langues disponibles
Fitti ng the car seat for 9-18 kg (approx. 9 months to 4 years)
Install the child seat in consistent with the vehicle's driving directi on.
Step 1:Put the red isofi x guide groove into the positi on of the Isofi x anchorage points.
Step 2: Rotate out the isofi x connectors uti l you hear a „click". Check that the isofi x connectors are
moving within the angle of 15°, and cannot turn around.
Step 3: Pull aft erwards the black plasti c coat of isofi x
Step 3: Pull aft erwards the black plasti c coat of isofi x
connectors to make the isofi x connectors in red window.
connectors to make the isofi x connectors in red window.
Red means the isofi x connectors are unlocked. Push the
Red means the isofi x connectors are unlocked. Push the
isofi x base towards the fi xed point, make sure the isofi x
isofi x base towards the fi xed point, make sure the isofi x
base locked on the fi xed points. Make sure the isofi x
base locked on the fi xed points. Make sure the isofi x
connector is in green window.
connector is in green window.
Lock: Green
EN
Unlock: Red
Publicité
