General Precautions; Installation - Accu-Turn ACCU 3602 Manuel De L'opérateur

1.6 GENERAL PRECAUTIONS

A. DURING THE USE AND MAINTENANCE OF THE MACHINE
IT IS MANDATORY TO COMPLY WITH ALL LAWS AND
REGULATIONS FOR ACCIDENT PREVENTION.
B. THE ELECTRICAL POWER SOURCE MUST HAVE A
GROUND CABLE AND THE GROUND CABLE OF THE
MACHINE (YELLOW WITH GREEN) MUST BE CONNECTED
TO THE GROUND CABLE OF THE POWER SOURCE.
C. BEFORE ANY MAINTENANCE OR REPAIRS ARE
ACCOMPLISHED THE MACHINE MUST BE DISCONNECTED
FROM THE AIR AND ELECTRICAL SUPPLY.
D. NEVER WEAR TIES, CHAINS OR OTHER LOOSE ARTICLES
WHEN USING, MAINTAINING OR REPAIRING THE
MACHINE. LONG HAIR IS ALSO DANGEROUS AND
SHOULD BE KEPT UNDER A HAT. THE USER MUST WEAR
PROPER SAFETY ATTIRE I.E.: GLOVES, SAFETY SHOES AND
GLASSES.
E. KEEP SAFETY DEVICES IN PLACE AND IN WORKING
ORDER.
F. KEEP WORKING AREA TIDY. CLUTTERED AREAS INVITE
ACCIDENTS.
G. AVOID DANGEROUS ENVIRONMENTS. DON'T USE
PNEUMATIC OR ELECTRICAL EQUIPMENT IN DAMP OR WET
LOCATIONS, OR EXPOSE THEM TO
RAIN.
H. KEEP THE WORK AREA WELL LIGHTED.
6

2.0 INSTALLATION

Install the machine in a covered and dry place.
Operation temperature is +41/+122 °F (+5/50 °C).
The ACCU Model 3602 can work below 32 °F, but
some minor modifications are required: contact
your ACCU distributor for detailed information.
ENSURE THAT ENOUGH SPACE IS LEFT AROUND THE
MACHINE TO PREVENT COMPRESSION OR
ENTRAPPING HAZARDS
Remove the screws that attach the machine to
A
the pallet.
Lift the column (#1 Fig.9) with an appropriate
B
lifting tool (crane, fork lift) and a belt of sufficient
capacity (2000N). For this operation it is required
to be helped by a second person.
Bolt the column (#1 Fig.9) to the cabinet (#2
C
Fig.9) with the four screws (#3 Fig.9) and washers
(#4 Fig.9). Screws must be firmly tightened.
(Fig.9)
Assemble the inflation gauge (#5 Fig.9) to the
D
tower.
Attach the air hose (#6 Fig.9) to the inflation gauge.
E
Operator's Manual
1036
ACCU 3602