Adapting The Sound Output - quadral aurum Notice D'utilisation

ADAPTING THE SOUND OUTPUT

In order to adapt the new AURUM 9 series individually to your living room conditions without distorting the
perfect sound character, all models are at least fitted with a high frequency switch (HIGH).
High range switch (HIGH)
HIGH +
In the high range, plus 2dB means an overall higher tonal level. This is worthwhile for very heavily insulated
rooms and for everyone who wants to hear a bit more "analytically". It can be a special advantage when
enjoying soft music, because the frequency-response curve is adjusted to hearing at a low level.
HIGH -
This switch setting makes sense in very hall-like rooms or at high listening volumes, because the frequency
response in the high range is adjusted to the hearing curve at higher volumes.
The models AURUM TITAN 9. VULKAN 9 and TITAN BASE 9 are also fitted with a mid range tone and low
tone filter switch.
Midrange switch (MID)
MID -
This lowers the volume in the listening area. In hall-like spaces, this can eliminate some midrange penetration.
However, this switch setting can also simply be used as a matter of taste.
MID +
The midrange plus 2dB setting makes the fundamental tone range a bit warmer. For rooms with selectively
heavy insulation, this can make the sound altogether more balanced and warmer.
Low tone filter switch (LOW)
LOW N
The neutral setting (N) set as standard in the delivery condition offers ideally structured bass reproduction for
this loudspeaker.
LOW +
The LOW+ switch raises the middle bass range by between about 40 Hz and 100 Hz. In very large rooms this
can lead to a desirable increase in full bass and pressure.
10