Treatment Regime; Maintaining Your Pure; Caring For Your Facial Brush Heads; Brush Head Replacement - Silk-n Pure H4101 Instructions D'utilisation

Masquer les pouces Voir aussi pour Pure H4101:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36

4.4 Treatment regime

For daily use.
Do not use Pure™ more than twice a day as this can irritate the skin and cause
redness.
Pure™ is designed to cleanse your skin in just 1 minute. We recommend you
not to exceed this time.

5. Maintaining your Pure™

5.1 Caring for your facial brush heads

Clean the brush head after every use. Remove the brush head from Pure™,
rinse it clean with warm water and mild soap to remove any build-up that
may have accumulated, shake off excess water and towel dry – or gently rub
the brush head against a towel for 5-10 seconds while Pure™ is switched on.
Do not attach wet brush heads to Pure™ while charging.
Do not allow liquid cleansers or moisturizers to accumulate on the brush
heads.
For the best results, we recommend you to replace the Regular and the Soft
brush heads after every 3 months.
Do not clean the facial brushes by putting them in the dishwasher

5.2 Brush head replacement

Refill brushes can be obtained through the retailer where you bought the device or
can be ordered from our website www.silkn.eu directly.
To attach a brush head, place the center of the brush head on the matching
brush attachment point located on the device.
Gently press the center of the brush head and push down until it clicks into
place.
28

Publicité

Table des Matières
loading

Table des Matières