Audiophony PA WEBRadio130App Guide De L'utilisateur page 50

English
WEBRADIO130App - Internet radio, DAB, FM, media player, AUX, BT, APP and remote control
12 - Auxiliary input mode
In AUX mode, you can play external sources such as MP3
players.
To use this mode, proceed as follows:
1 -
Set the volume of both the webradio and your external source at
the minimum.
2 -
Connect the external source to the Jack 3.5mm input (AUX
INPUT).
3 -
Adjust the webradio and your external source volume.
13 - Alarms and sleep function
The webradio features two alarmes with snooze function, as well
as a sleep function allowing you to put your webradio in stand-by
after a determined amount of time.
To set the date and hour, please refer to paragraph 5-2.
13-1 - Alarms
To configure the alarms, use the ALARM or MENU button, then
select > Main menu > Alarms.
Select one of the two alarms then follow the instructions below:
• Enable: On/Off
• Frequency: Daily, Once, Weekends, Weekdays.
• Time: When the alarm will trigger.
• Mode : Buzzer, Radio Internet, DAB ou FM.
• Preset : Last listened or 1 to 10.
• Volume : 0 to 20.
To activate the alarm, select Save at the bottom of the list.
The display will the indicate the alarm(s) you just configured.
The alarms will trigger as scheduled, but pressing the SLEEP
button allows you to temporarily put it back in stand-by. Each
pressure on the SLEEP button allows you to increase the delay.
13-2 - Sleep function
The SLEEP function allows you to turn your webradio off after a determined amount of time.
It can be configured as follows: Off, 15 min, 30 min, 45 min or 60 min.
To configure this function, select >Main menu > Sleep.
50