Publicité
Les langues disponibles
Les langues disponibles
3. Adjust the desired DMX values (0-255) for the DMX channels using the sliding
controls and, if necessary, the pan and tilt wheels.
• As soon as a fader is moved, the display indicates the number of the control channel
in the lower line and the current output value as a DMX value.
4. The 32 light effect units are combined in 2 groups (channel pages) of 16 channels
each. If necessary, use the button PAGE to switch between the two channel groups
1-16 (LED A lights) and 17-32 (LED B lights) and repeat steps 2 and 3, until the desired
values are assigned to all channels.
Adjusting an Illumination Scene with Movement Patterns and Color
effects
The built-in effect generator allows creating 9 different movement patterns for pan
and tilt movement of moving heads or scanners as well as 7 additional color effects
for LED light effect units. The effects can be saved together with other DMX values in
a scene.
1. Press the button FIXTURE (control LED lights) and use the number buttons 1-16 to
select the devices to be assigned to an effect.
• If necessary, used the button PAGE to switch between the two channel groups 1-6
(LED A lights) and 17-32 (LED B lights).
2. Call the effect mode with the button MOVEMENT.
• The control LED lights.
3. Select the desired movement patterns or color effect with the number buttons
1-16.
• The selected devices will begin to perform the movement pattern or color effect.
• Number buttons 1-9: Create movement patterns designed for pan and tilt
movement of moving heads or scanners.
• Number buttons 10-16: Create color effects for all kinds of LED light effect units.
• For optimum results of the color effects triggered by buttons 15 and 16, the
operation with a least 8 devices is recommended.
4. The parameters of the movement patterns and color effects can be edited and
adapted to your particular application.
MOVEMENT RANGE
Fig. 7.2 Adjusting parameters
PAN:050%
TL:080%
• Movement patterns 1-9: Press the button SWAP to switch between the parameters
and adjust the values with the Pan/Tilt wheels.
- MOVEMENT RANGE: The pan/tilt movement can be adjusted between 1 and 100 %.
- MOVEMENT OFFSET: Correction values can be adjusted for fine adjustment of the
pan/tilt movement.
©Copyright Lotronic 2018
Manual DMX512-PRO
11
Publicité
