Recharge The Batteries Through The Docking Station; Insert And Eject The Memory Card - Philips LFH 0955 Manuel De L'utilisateur

during USB charging, change the USB mode
to USB supply by pressing the
three seconds while the Digital Pocket Memo is
connected to the PC. The Digital Pocket Memo
automatically switches back to
Mode after being disconnected from the PC.
D Note
The PC must be ON when charging battery via
the USB cable connection. The Digital Pocket
Memo may become warm during fast recharging.
Important
C
If the USB port of the computer does not supply
enough power capacity (500 mA), disable
charge in the menu of the Digital Pocket Memo and
recharge the batteries using the power supply.
2.2.3 Recharge the batteries through the
docking station
Make sure that the docking station is
1
connected to the main power supply with
the Philips power supply.
Insert the Digital Pocket Memo into the
2
docking slot of the docking station and press
it down firmly until it locks. The green LED
lights up, indicating that the batteries of the
Digital Pocket Memo are being recharged in
fast recharge mode.
Record with the Digital Pocket Memo from
3
the docking station, or switch it off when
not being used.
When the green LED blinks, recharging is
4
complete and you can remove the Digital
Pocket Memo from the docking slot.
8
button for
REC
PC Download
USB quick
D Note
When the Digital Pocket Memo is connected
to the docking station, it is powered by the
docking station and not by the batteries. If
the Digital Pocket Memo is operated with
rechargeable batteries, the batteries are
automatically recharged while the Digital Pocket
Memo is connected to the docking station.
2.3

Insert and eject the memory card

The Digital Pocket Memo operates with an SD
(Secure Digital) memory card and supports SD
cards with storage capacities of up to 2 GB.
Your Digital Pocket Memo is packaged with a
memory card already inserted and formatted.
To eject the memory card:
Locate the memory card slot on the top
1
back side of the Digital Pocket Memo.
Press the memory card in the Digital Pocket
2
Memo until it clicks.
Release the memory card. It will slightly
3
emerge from the memory card slot. Simply
slide it out.
1
1
User manual
2