Télécharger Imprimer la page

Eco Steam Buddy Mode D'emploi page 16

Publicité

Les langues disponibles

Les langues disponibles

Care / Maintenance
• Never immerse the appliance in water.
• Never use corrosive or abrasive cleaning agents.
• Never put any anti-lime scale agents or any other chemicals into the devise when in use.
• Empty the water tank after each use.
To clean, wipe the appliance clean with a damp cloth if necessary. A mild cleaning agent may be used to clean the
steamer. But ensure the steamer is completely rinsed before next use.
Washing the cleaning cloths
The cloths can be machine-washed at up to 60
Troubleshooting
Problem
No steam
Instead of steam, water is
coming out
Technical specifications
Voltage: 230 V / 50 Hz / 1550 Watts
Protection grade: IPX4
HSS 94150 Rungis
C and allowed to drip dry or be tumble dried.
o
Possible cause
Appliance is not turned on, steam
release not pressed, appliance not
connected to power socket, or
appliance not yet heated up.
Water tank is empty.
The water is condensing in the
tube.
Remedy
Check if the steamer is connected
to an outlet and turned on or if you
press the steam release. The
steamer has to heat up for about
30 seconds.
Fill the water tank with water as
described under" Refill water".
Press steam release until steam is
coming out. Lay a cloth under the
steam openings as water can
come out.
7

Publicité

loading