BE Power Equipment P1715EN Manuel D'utilisation page 9

ASSEMBLY INSTRUCTIONS
7
F
Unlocked
Locking Spray Gun (Before Lance Installation)
To lock trigger of spray gun (F), point gun away
from you and turn dial to lock ("3" and "9" position).
Squeeze or pull trigger to make sure it is locked.
ALWAYS leave in locked position when not in
use. This ensures the gun is in "safe" mode until it
is ready for use. Turn dial to unlock ("12" and "6"
position) to release spray gun trigger.
Note: The trigger lock prevents trigger from being
accidentally engaged.
9
J
Attach nozzle (J) into end of lance (I) by pressing selected
nozzle into place. It will make a "click" sound when firmly in
place.
Note: Always turn the safety lock dial to lock trigger when
changing lances and nozzles to ensure that they do not
accidentally eject with force during removal.
bepowerequipment.com
Locked
I
8
I
Extension Lance Installation
With spray gun (F) in locked position, attach extension
lance (I) directly to spray gun. Insert lance extension
into gun, pushing together and turning clockwise
simultaneously. Turn the extension collar clockwise to lock
into place. To remove extension lance (I), turn extension
collar counterclockwise to unlock, then push together and
turn counterclockwise to release.
Note: The extension lance must be inserted in gun
before using any of the other attachments, and in place
for storage. It is recommended that once extension is
connected to leave it in place.
10
2
J
To remove nozzle (J) pull back on collar of lance (I) and
pull out nozzle.
F
I
1
9