Belkin F1U119 Guide D'utilisation page 24

P73074/F1U119/AM/man.qxd
Addendum: Disabling Bi-directional
Communication for HP Printer
6. Once Windows
by clicking the "Start" button, then going to "Settings," click on "Printers."
7. Right-click on the printer, then go to "Properties." Click on the "Details"
tab, then click on the "Spool Settings" button. If it is not grayed out,
make sure that the "Disable bi-directional support..." radio button is
checked. Click "OK." Click "Apply" if not grayed out.
8. Also on the details tab, click on "Port Settings." If selectable, make sure
that "Check port state before printing" is unchecked.
For Windows ® 3.x users:
1. For Windows
2. Click on "File." Click on "Run." Type the name of the configuration file
which matches your printer in the above table. Click "OK."
3. Follow instructions no. 3 through 5 listed above under For Windows
users. The same instructions apply for Windows
4. Double click on "Main," double click on "Control Panel," then double
click on the "Printers" icon.
5. Highlight the printer, then click on "Connect." Make sure that "Fast
printing direct to port" is unchecked.
4/19/00 4:25 PM
® has restarted, go to the "Printers Folder," which is found
3.x, go to your "Program Manager."
®
20
Page 20
(continued)
® 3.x users.
® 95