Envelope Catch Tray Position; Maintenance; Routine Maintenance - Pitney Bowes DL400 Mode D'emploi

Removal/Replacement and Adjustments

Envelope Catch Tray Position

You can adjust the position of the Envelope Catch Tray, if required, for
processing larger envelopes. The Envelope Catch Tray can be positioned in
three positions.
• Against the machine
• 2.5 cm away
• 5 cm away
Simply lift the Catch Tray, move it to the desired position and press it down
onto the Catch Tray Adjustment.
SDC965B DL400 Operator Guide
Envelope
Catch Tray
Catch Tray
Adjustment

Maintenance

Routine Maintenance

• It is important that you keep your machine clean and in good working order. This
will prolong the overall life of the machine and result in improved productivity from
your system. You should perform the following tasks regularly.
Cleaning Model DL400
1. Unplug the power cord.
2. Remove the Upper Transport Cover.
3. Remove and empty the Chip Bin.
4. Vacuum loose paper chips and debris from the machine.
5. Use a cloth moistened with liquid cleaner to wipe down the exterior of the machine.
NOTE: When cleaning glass and plastic surfaces, use detergent-based cleaners.
These are recommended because they do not cause component degradation.
6. Wipe dust and dirt from the sensors. Debris build-up can cause machine
stoppages or prevent sensors from working correctly.
7. Replace the Chip Bin and Upper Transport Cover.
DANGER! Cleaning any internal part of the system whilst the system is in
operation or connected via the power cord can result in serious personal
injury. Always ensure the system is disconnected before proceeding with
maintenance.
Chip Bin Full
After 3500 enelope openings the Chip Bin Full indicator light will come on and the
chip bin must be removed and emptied to reset the indicator light.
EN
<< Return to Contents