Operating Your Radio - Search Tuning Fm - Sangean DPR-26BT Mode D'emploi

Operating your radio – Search tuning FM
. Fully extend the telescopic aerial for FM reception.
. Press and On/Off button to switch on your radio. The display will show "Welcome to Digital Radio".
. Press the Band button to select the FM band.
4. Press and immediately release the Auto tune button, your radio will scan in an upwards direc-
tion (low frequency to high frequency) and stop automatically when it finds a station of suf-
ficient strength.
5. After a few seconds, the display will update and may show the station name (FM RDS).
6. To find other stations, press and release the Auto tune button as before.
7. To scan the FM band in a downwards direction (high frequency to low frequency), rotate the
Tuning control in an anti-clockwise direction first and then press and release the Auto tune
button.
8. When the waveband end is reached, your radio will recommence tuning from the opposite
waveband end.
9. Adjust the Volume control to the required setting.
0. To switch off your radio, press On/Off button.
7
Welcome to
Digital Radio
2
89.30MHz
Serching... >
3
Serching... <
4
6,7
9
FM