Specifi Cations - Sharp GX-BT7 Mode D'emploi

Specifi cations
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specifi cation
changes for product improvement without prior notice.
The performance specifi cation fi gures indicated are nomi-
nal values of production units. There may be some devia-
tions from these values in individual units.

General
Power source AC 100 - 240 V ~ 50/60 Hz
Power AC: Power on: 21 W
consumption Power stand-by: 0.4 W (*)
Dimensions Width: 446 mm (17 - 9/16'')
Height: 155 mm (6 - 1/8")
Depth: 154 mm (6 - 1/16")
Weight 2.5 kg (5.5 lbs.)
Frequency band 2,400GHz - 2,480GHz
Compatible A2DP (Advanced Audio
Bluetooth Profi le Distribution Profi le), AVRCP (Audio/
Video Remote Control Profi le)
Bluetooth 2.1 +EDR
( * ) This power consumption value is obtained when the
Bluetooth stand-by mode is cancelled in the power
stand-by mode. Refer to page 4 to cancel the Blue-
tooth stand-by mode.

Amplifi er
Output power Front speaker:
RMS: 10 W (5 W + 5 W) (10%
T.H.D.)
RMS: 7 W (3.5 W + 3.5 W) (1%
T.H.D.)
Subwoofer:
RMS: 10 W (10% T.H.D.)
RMS: 8 W (1% T.H.D.)
Input terminals Audio In (audio signal):
500 mV/47 k ohms

USB (MP3 / WMA)
 Complies with USB 1.1 (Full
USB host
interface
Speed)/2.0 Mass Storage Class.
 Support Bulk only and CBI
protocol.
 MPEG 1 Layer 3
Support fi le
 WMA (Non DRM)
 MP3 (32 ~ 320 kbps)
Bitrate support
 WMA (64 ~ 160 kbps)
 Maximum total number of MP3/
Other
WMA fi les is 65025.
 Maximum total number of
folders is 999 INCLUSIVE of root
directory.
 Support USB devices with
File system
support
Microsoft Windows/DOS/
FAT 12/FAT 16/FAT 32.
 2 kbyte block length for sector.

Speaker
Type 2-way type speaker system
Front Speakers:
5 cm (2") - 3 Ω - Full Range
Subwoofer: 8 cm (3-1/8") - 6 Ω
- woofer
Maximum input Front Speakers: 10 W / Channel
power Subwoofer: 10 W / Channel
Rated input Front Speakers: 5 W / Channel
power Subwoofer: 5 W / Channel
E-14