Publicité
Les langues disponibles
Les langues disponibles
Putting on
Turn on the thermostat control knob (#3 on picture) on desired position : the
green pilot light (#1 on picture) ignites and the appliance is on.
Once orange pilot light (#2 on picture) is off, the machine reaches the preset
temperature.
Temperature setting
Set the temperature by positioning the thermostat (#3 on picture) to the desired
temperature.
Stopping the appliance
Set the thermostat control knob (#3 on picture) on 0: the pilot light turn off, the
appliance is no longer functioning.
Let the device cool.
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- For cleaning, only use non-abrasive products, clean regularly the external walls of
your device with warm water and wash liquid: avoid the abrasive towelling. Rinse
your device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in
a irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
- During a prolonged non-use, we recommend you strongly to keep the device
shielded from the humidity.
15
Publicité
