Ferplast CAYMAN LED Manuel D'utilisation page 5

LED LIGHTING SYSTEM = low power consumption.
Guarantees longer tube life, produce less heat and is safer.
TIMER
Timer for setting the lights to switch on and off:
a) Set the arrow to the right time by turning the timer wheel;
b) Set the time for the lights to come on by moving the pins
towards the outside;
c) Set the timer switch onto one of the positions:
T = Lights controlled by timer
OFF = Lights always off
ON = Lights always on
N.B. Remember that the timer must always be reset whenever the electric
power supply is switched off.
BLUWAVE
INTERNAL FILTER SYSTEM, EQUIPPED WITH:
1 Double water intake;
2 BLUCLIMA heater
(to adjust it, just re-set the selector on the top of the heater to
the required temperature);
7 BLUPOWER pump;
8 Adjustable circulation jet.
The BLUWAVE filter ensures 3 filtration stages:
• Mechanical filtration (3)
• Biological filtration (4/5)
• Adsorbent filtration (6)
Aquarium maintenance. The main maintenance procedures we
recommend, in addition to the daily provision of food and regular checking
of the temperature and chemical levels, are:
A Siphoning the bottom when required using the special aquarium gravel
cleaner BLU 9025/9027 on sale at your local retailer.
B Adding demineralised water to replace that which is lost by evaporation.
Remember that the internal filter must always be submerged.
8
6 5
7
C Replacing 5-10% of the water with demineralised water at least
monthly.
D Replacing the LED lamps is not necessary. On the contrary, it is
necessary in case of fluorescent ones.
E Cleaning the inside of the aquarium using floating magnetic brushes
BLU 9031/9036/9038/9039 designed by Ferplast.
1
4 3 1
2
GB
IT
FR
D
NL
ES
PT
SK
CS
HU
SV
DA
PL
RU
5