3M M170 Guide De L'utilisateur page 35

3.74" (95 mm)
Front Edge
of Base
Rear Edge of Base Not Shown
M170 Base Plate Mounting Template
3M Touch Systems Proprietary Information
Drill 4 Mounting Holes
0.178" (4.5 mm) Dia.
Place this template on mounting surface and drill four holes as shown for mounting screws.
The screw heads must be smaller than 0.39" (10 mm) and larger than 0.21" (5.5 mm).
Adjust height of screw heads to securely lock monitor in place. This height is about 0.178" (4.5 mm).
0.21" (5.5 mm)
Locking
Mechanism
Receptacle
( Drawn actual size)
5.71" (145 mm)
Bord arrière de la base caché
Rear Edge of
Base Not Shown
0.39" (10 mm)
0.70" (17.8 mm)