Wan Status; Wireless Setup - Topcom Skyracer WBR 244 Guide D'installation Rapide

HL_WBR244.book Page 12 Tuesday, February 11, 2003 11:44 AM

4.2. WAN STATUS

-> Click Status to check the WAN connection status

4.3. WIRELESS SETUP

-> Click Wireless to go to the wireless section
Basic
- Enable or Disable the wireless part.
- Enter the SSID . Make sure that the wireless clients are set to the same SSID as the Wireless
Broadband Router.
- Enter the channel number.
-> Click Apply to confirm the entries.
WBR 244
ENGLISH
12