Recording Continuously - EYENIMAL Dog Videocam Guide D'utilisation

Proceed as follows to attach the video cam mount to the EYENIMAL
 Open the mount by pushing the button in the direction shown by the arrow.
 Fit the mount into the notch on the right side of the cap.
 Re-close the mount by pushing the button in the opposite direction.
3/ Angle the video cam as required
When the video cam is fitted on the dog's neck or on the EYENIMAL
adjust the viewing angle by rotating the video cam mount upwards or downwards.
The indicator light on the top of the video cam must be directed upwards.
Diagram 7
360° rotating mount to
adjust viewing angle
● Recording continuously
This mode can be used to film continuously.
To select this mode, set the mode selector to position 1 (see diagrams § Description).
Fitting the video cam to the EYENIMAL
Optimal viewing angle
for the video cam
fitted on the collar
Diagram 6
Diagram 8
®
cap:
®
cap
®
cap, remember to
Diagram 9
Optimal viewing angle
for the video cam
fitted on the cap
19