Publicité
Les langues disponibles
Les langues disponibles
GB
Our products have been developed to achieve the highest standards in quality, functionality
and design. We hope you enjoy your new SKY steam cleaner by PALSON.
IMPORTANT SAFETY GUIDELINES
Power supply
-
Make sure the voltage indicated on the characteristics label coincides with the mains
power supply before plugging your steam cleaner into a mains socket.
-
Only plug the appliance into a suitable socket that is earthed.
-
The plug on the appliance must fit properly into the mains socket. Do not modify the
plug in any way. Do not use adapters with earthed domestic appliances. Unmodified
plugs and suitable sockets reduce the risk of electric shock. The appliance should only
be used with a plug that is protected by a circuit breaker. Check with an electrician if
necessary. Never touch the plug with wet hands.
-
When unplugging the appliance, always pull the plug out of the socket. Never pull on the
cable!
-
If the power cable is damaged it must be replaced by the manufacturer or its authorised
technical service, or a qualified technician to avoid danger.
-
If using an extension lead, make sure the voltage coincides with that of the steam
cleaner. Consult a specialist distributor if necessary.
-
Make sure there is no risk of tripping over the cable. It should not be tangled, pierced or
trapped .
special groups of people
-
Be very careful when using the appliance in the presence of children or disabled
people .
-
Never leave the appliance unsupervised, especially if there are children or people with
disabilities in the same room.
-
This product should not be used by children or other people without supervision if their
physical, sensory or mental state prevents them from using it safely. Children must be
supervised to make sure they do not play with this product.
-
Do not allow children to play with the packaging materials.
OPERATING THE STEAM CLEANER
-
Check the appliance, cable and accessories periodically to spot any damage. Never use
a damaged appliance or accessories.
-
Never point the steam cleaner at people, animals or plants (risk of burns). Never point
the steam cleaner at cables or electrical systems.
-
Never leave the appliance switched on and unsupervised. Always turn it off and unplug
it if you're going to leave the work area.
-
The appliance comes with a thermostat and a thermal switch to prevent overheating.
-
The accessories heat up during use: let them cool down before changing them.
-
Never open the tank during use. The tank is pressurised.
-
The appliance should not be held at an angle of over 45º when in use.
-
Never submerge the appliance in water or any other liquid.
-
Keep the cleaner out of the rain and damp. It is not suitable for outdoor use.
-
Do not use the cleaner if there is no water in the tank. Always fill it up beforehand with
distilled water.
-
Empty the water tank when the appliance is not in use.
-
Never fill the appliance tank with anything other than distilled water. Never add other
products (such as perfumes, stain removers or products containing alcohol) to the water
tank, since they might damage the appliance or make it dangerous to use. However,
detergent can be added to the steam cleaner's detergent tank (10).
-
Always unplug the cleaner and leave it to cool down completely before filling the tank
with distilled water.
12
-
Do not overfill the tank. Never exceed the maximum level indicated. Please use the
graduated beaker and funnel provided with the cleaner.
-
Make sure the water tank cap is screwed on tightly before using the cleaner.
-
Pick up the appliance by the handle only.
-
Do not touch the hot areas of the appliance. It is normal for the steam cleaner to heat
up when in use.
-
Do not use the cleaner to treat any item of clothing if being worn at the time by you or
someone else.
-
Occasionally, a little water might drip from the nozzle. It is condensation and is totally
normal .
-
The force and heat of the steam may have an adverse effect on some materials. Always
make sure the surface is suitable for treatment using this appliance by testing it out on
a small patch that is not visible.
-
Always include the user instructions when lending the steam cleaner to someone else.
MAINTENANCE AND CLEANING
-
Only use the original accessories supplied with the appliance.
-
To avoid risks, do not carry out any repairs yourself. For any repairs required, contact
the authorised technical services and make sure your appliance is repaired by specialist
qualified technicians using original parts.
-
Always switch the steam cleaner off, unplug it from the mains and allow it to cool down
before cleaning it or carrying out any maintenance .
UNPACKING THE STEAM CLEANER
Remove the steam cleaner and all the accessories from the packaging. Make sure the box
contents are complete. If possible, keep the box and internal packaging in order to protect
the appliance during transportation or when returned if claiming under the guarantee.
Dispose appropriately of any packaging material you no longer need. Contact your distributor
immediately if you notice any transportation damage when unpacking. Do not use the
steam cleaner under any circumstances if it has been damaged in any way.
Warning! Make sure packaging is kept well away from children.
USER INSTRUCTIONS
Attaching accessories.
Before using the steam cleaner, attach the steam hose and the required accessory.
-
Place the steam cleaner on a table. Unscrew the water tank cap (Fig. 1): To do that,
press the cap down and at the same time turn to the left. Use the refill jug provided to
fill the tank with water.
-
Use the refill jug to fill the tank with water (320 ml max), press the cap down and then
turn to the right (Fig. 2 and 3)
-
The amount of water used should never be more than 320 ml; otherwise little steam will
be produced .
-
The cap must be screwed on tightly so the steam does not escape from underneath.
USE OF THE DETERGENT FUNCTION
-
Turn the detergent tank cap to the left to open it. Fill with 250 ml of liquid detergent (max)
and replace the cap (Figs. 4 and 5).
-
Adjust the selector to the Min (minimum detergent) or Max (maximum detergent)
position
CONNECTION TO THE MAINS POWER SUPPLY
Plug the steam cleaner into a power socket that has been correctly installed. Around 8
minutes later, the steam cleaner will be ready. You can press the button lightly to check
whether steam is produced (Fig. 6).
13
Publicité
