Publicité
Les langues disponibles
Les langues disponibles
2.1
Adjustment Ranges
Parameter
Setpoint(s)
Proportional Band
Reset
Rate
Bias
(Manual Reset)
ON/OFF Hysteresis
Alarm (1 & 2) level
Input Filter Time Constant
Input Offset
Output Cycle Time
Setpoint Lock
Alarm Value Display
Enable/Disable
2.2
Default Values/Settings
Parameter
Setpoint(s)
Proportional Band
Reset
Rate
Bias (Manual Reset)
ON/OFF Hysteresis
Alarm (1 & 2) level
Input Filter Time Constant
Input Offset
Output Cycle Time
Setpoint Lock
Alarm Value Display Enable/Disable
OM076
1/32-DIN Temperature Controller
Operator's Manual
Input Range Min. to Input Range Max.
NOTE: Negative values limited by display to –1999
0.5% to 999.9% (0.1% increments)
1 sec. to 99 min. 59 sec.
and OFF (>99min. 59 secs.)
0 (OFF) to 99 min. 59 sec.
0.1% to 10.0% of input span
Process High: Input Range Min. to Input Range Max.
Process Low: Input Range Min. to Input Range Max.
Deviation (High or Low): –(input span) to +(input span)
Band: 1 LSD to Input Span
NOTE: Negative values limited by display to –1999
NOTE: Negative values limited by display to –1999
0.5 (SSR only), 1, 2, 4, 8, 16, 32, 64, 128, 256 & 512 sec.
adjustment enabled in Normal Operation
adjustment disabled in Normal Operation
display/adjustment enabled in Normal Operation
display/adjustment disabled in Normal Operation
Alarm 1 Process High: Input Range Max.
Alarm 2 Process Low: Input Range Min.
Page 5
Adjustment Range
0% to 100%
0sec. to 100sec.
±input span
Default Value/Setting
Input Range Min.
10.0%
5 minutes
1 minute 15 seconds
25%
0.5% of input span
2 seconds
0
16 seconds
(adjustment enabled)
(enabled)
June 1997
Publicité
