Soundcore Liberty Air Manuel De L'utilisateur page 7

Slow flashing white (Right
earbud only)
Tap the multifunction touchpad on the
left earbud twice
Reset
1
2
4
Reset the earbuds if you can only hear sound on one side:
1. Delete the "Soundcore Liberty Air" in device's bluetooth list,
and turn off the bluetooth on your device.
07 English
Incoming call
Activate Siri / Other
voice control software
3
Soundcore
Liberty Air
2. Only take one earbud out of the charging case. Tap the
multifunction touchpad on the earbud for 4 times. Repeat
the same on the other earbud.
3. Put both earbuds into the charging case.
4. Then take both earbuds out of the charging case, place them
near each other, then the LED indicator will start flashing in
white(breathing-like).
5. Once the LED indicator on right earbud flashes white, go
to the Bluetooth® pairing list on your device and select
"Soundcore Liberty Air".
Specifications
Specifications are subject to change without notice.
Input
Charging time
Playtime (varies by volume level and
content)
Weight (product net weight)
Impedance
Driver (full range)
Frequency response
Bluetooth version
Range
5 V 0.5 A
2 hours
5 hours
55 g / 1.9 oz
16 Ω
6 mm × 2
20 Hz - 20 KHz
V 5.0
10 m / 33 ft
English 08