Product Contents And Appliance Overview; Prior To Fi Rst Use - DS Produkte HL-09 Mode D'emploi

Product contents and appliance overview

5
4
1 Operating switch MODE:
4 settings: OFF (deactivated); top
heat; bottom heat; top / bottom heat
2 POWER light
3 TIMER dial (0 to 60 minutes)
Prior to fi rst use
ATTENTION!
■ Risk of suffocation! Keep the packaging material away from children and animals.
■ Burn hazard! During operation, the appliance becomes very hot. Be absolutely
sure that you do not come into contact with the heated parts during and after using
the appliance. Only touch the handles and the controllers when the appliance is in
operation or directly after deactivating it.
1. Unpack the appliance and make sure that the product contents are complete and that
there are no transport damages. Should you identify any transport damage, do not
use the appliance (!); instead please promptly consult the customer service.
2. There may be some production residues stuck to the appliance. To avoid health risks,
clean the inside of the housing, the grate and baking sheet thoroughly before fi rst use
(see chapter "Cleaning").
3. Always place the appliance on a dry, level and heat-resistant surface with adequate
space of approximately 10 cm on all sides and 30 cm of overhead space to fl ammable
objects. Please make sure that the appliance is not accessible to children and animals.
4. Insert the mains plug in a properly installed and grounded 220–240 V socket with
earthing contacts. Your infrared oven is now ready for operation.
5. The fi rst time you use the appliance, do so without food as residual coating could
cause a small amount of odour or smoke to form. Let the empty appliance heat up for
approximately 15 minutes with top / bottom heat (see chapter "Use"). In the process,
ensure that the room is well ventilated, e. g. with windows that have been opened wide!
15
4 Glass door
5 Door handle
Not shown:
• Grate
• Baking sheet
EN
1
2
3