Publicité
Les langues disponibles
Les langues disponibles
Get Started:
1:
Make sure you have made all the necessary cable connections
before connecting the Soundbar to a wall outlet, the soundbar
will enter to standby mode, the indicator will light up in red.
2:
Make sure the subwoofer is connected to the power, and turn
the button to "ON"
3:
Short press
turn on the soundbar. The LED display will light up.
4:
Press the source button on unit or Remote Control to choose
various sources.
Note: The Soundbar will re-enter the Standby Mode again if
there is no operation for 15 minutes.
Bluetooth Pairing:
1:
Short press the Source button on the Soundbar to choose the
Bluetooth Source.
2:
The LED display will light up
3:
Press the Pair button on the side of the unit. The pairing
indicator will flash quickly.
4:
Turn on the Bluetooth function on your devices and the device
will start to search for the Soundbar.
5:
Select "SBW-801BK" from the list of found devices.
6:
If asked, enter the password "0000" and press OK.
7:
When successfully paired with your device, the indicator light
will be lit steadily.
Note: The Bluetooth playback is controlled by your device and
the buttons on the remote control.
Note: The operation range for the Bluetooth connection is
10 meters.
Note: If a mobile phone on which you are playing music receives
a call, the music will be interrupted and not played. After call
end, the devices are connected to each other again and playback
continues.
8:
Press and hold the Bluetooth button on the Remote Control for
3 seconds to disconnect the Bluetooth pairing.
/SOURCE on unit or
12
on remote control to
Publicité
