Fowler 54-212-024-1 Mode D'emploi page 14

6. Customising the instrument (favourite key)
E
The «favourite» key
the needs of the user. In order to assign a function to the «favourite» key, give a prolonged (>2s) press on
, and then select the required function:
→ Data transmission (default)
→ Hold display
→ mm - IN
→ REF1 - REF2 - AUTO
7. Connecting the instrument
The instrument can be connected to a peripheral via a Proximity or Power-RS/USB cable
It is possible to transmit the measured values, and control the instrument using predefined commands (list
of main commands, see chap.12)
gives direct access to a predefined function, and can be configured according to
→ Recall Preset
→ Measurement sense, positive - negative
→ Switching between surface mode and
diameter / groove mode
14